Detailed Product Description

Detail information of the drywall metal stud roll forming machine as follows:

The material of baking finish stud is baked galvanized steel plate after heat treatment on the surface. The thickness of the plate is 0.3 - 0.35mm. It is white, with dummy surface and smooth texture.

It is used in decoration of ceilings of hotels, business offices, office buildings, exhibition centers and houses. After jointly used with sound insulation plate, baking finish stud can reach excellent effect of sound insulation. It is easy to install and operate.

1            Main technical parameter

1      Raw Material : hot dip galvanization metal strip

2      The thickness of the raw material: 0.4-0.7mm

3      The width of the feed-in: 150mm

4      The inner diameter of the steel coil : 508-600mm

5      The outer diameter of the steel coil : 1200MM

6      Molding main electric energy: electromagnetism timing electricity energy: 7.5kw

7      Working pressure 380v 50hz  control pressure 24v

8      The molding main electric consist of 12 axes

9      The molding mainframe use jointing steel structure

10    Transmission mode : gear wheel transmission( the material of the gear wheel use 45# steel, the surface disposed by high frequency )

11    Roller use 45# steel, confection disposal, the hardness of the confection is  HB250-280.surface grind,chop process. The outer diameter is 60mm

12    Roller mould use axletree steel Gcr15 salt bath quench.hardness is HRC58-62

13    The fast production speed 20M-30M/ minute

14    The max error of the molding keel is 0.30mm

15    Feed-in material way : from left to right

2            cutting equipment

16    hydraulic prssure qua power switch off

17    The ability of the cutting 6tons

18    Hydraulic pressure system pressure: 12Mpa. Work pressure 5Mpa

19    The form of the cutting: 45 degree sloping chop

20    cutting scrap  0mm

21    The cutting machine frame by steel structure jointing

22    The cutting mould by expert mould steel CR12, salt bath quench hardness HRC60-62

23    Fix ruler length error <= 1.5mm

3            Feed-in machine

24    Steel structure frame

25    By rise and tighten style

26    Max bear the weight of machine is 2tons

4            The whole production line

Feed-in machine --- material right/left guide --- correct calm machine molding mainframe roll mould ---finished product correct straight machine --- hydraulic prssure cutting equipment( hydraulic pressure station) ----- track cutting stepped vehicle sever mould ---- received frame of material --- electric control box 

PRODUCTION LINE OF THE MACHINE

1 Feed-in machine    one set

2Molding mail electric    one set ( including material right/left guide, correct calm machine, finished product correct straight machine)

  3Rolling mould      3 sets

 4 Cutting mould   3sets

  5Hydraulic station    1 set

  6 track cutting stepped vehicle   1 set

 7 received frame of material

 8   electric control box     1 set

Technology service period: the GUARANTEE of the equipment is one year,during this period,for the reason of machine itself cause the quality problem,the seller need to supply technic service,change the parts free.if excess the quarantee period,the buyer need to buy the parts within 5 years,the seller should supply at the lowest labour price.

Meas of the machine:

Main electric  L 5000mm X W 1650mm X H 1250mm

Length of the production line L 14500mm×W 1650mm X H 1250mm

The volume of production L 20000mm X W 4000mm