Detailed Product Description

Automatic cold-formed metal sheet molding machine; Model: ZDLL-CL55-14A

2.Wall Stud and Track

2.53.545.56

The product specifications of this equipment can be completed:

Wall Stud and Track 2.53.545.56

3.Raw material: galvanized steel sheet/ ordinary plate/ high-strength low-alloy galvanized steel sheet

Thickness: 0.9mm 1.6mm; feed width : 100-400mm

4.Model no.: ZDLL-CL55-14A

5 . Production process

Traction uncoil - Automated follow-punching - Roll Forming Straightening Automated follow-off after forming - finished

6 .Equipment performance

1Continuously automated production

2 Flow-forming transmission: high-strength gear. Power output: servo motor configuration MTJ spiral bevel gear reducer. Servo motor power is 7.5kw.

3Production line speed: punching state during operation is 12M/min, non-punching operation speed is 24M/min

4)Hydraulic automatic follow-punching: controlled by the servo motor; Ball screw drive. Linear guide running

Distance punching can be arbitrary adjustment; Adjustment range: 300 750mm.

Punching quantity can be set; distance error of plus or minor is 2.0mm

5)Hydraulic automatic follow-cutting: controlled by the servo motor; Ball screw drive, linear guide running. Workpiece can be arbitrary adjustment; Lenghth error of plus or minor is 2.0mm.

7.Full set of the equipment include the follow section

A. One-head uncoiler one set( for galvanized coil) feeding:1500kg, galvanized coil: OD 1200mm,ID 480-510mm. plate width in accordance with the products. Driven by the above host. Description: the ID of the coil plate can be adjustment through the regulation of the central nut.

B . Cold forming host one set.

Model: ZDLL-CL55-14A Forming Road: 14, including feed of traction and Straightening Units

Host has the high precision welding, processing and assembly.

Drive motor: 7.5kw servo motor configuration MTJ spiral bevel gear gearbox.

C.  Molding roller: one set, can produce all the size through the regulation of the distance.

D. Hydraulic automated punching: one set

E. Hydraulic automated follow-cutting equipment: one set

F. 4meters length feed out rack one piece

G. Electrical control box    1set

Separate procedures for operation panel and host connectivity

H. Punching mould       1set

Cutting mould    10sets